23184 2WD/4WD Cam/Cas Sleeve 1 Degree

2WD Adjust 1.00 Degree Total Change

4WD Adjust .75 Degree Total Change

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks.

To save time during alignment, use the 23199 zero sleeve to determine initial readings

Adjustment Range: Cam./Cas. ±.25 degree to ±3.50 Degree

Installation Time: .5 hr/side

Required: 1 Per Wheel

Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller, 87175 - Special Socket

Applications :

FORD 2WD: 1987 & Up F350, 1987-96 F150, F250 (L/D), 1989-90 Bronco II, 1992 & Up E150, E250, E350, 1991-94 Explorer, 1989-97 Ranger, 1999 & Up F250, F350 Super Duty

FORD 4WD: 1991-94 Explorer, 1990-97 Ranger

MAZDA 2WD: 1991-97 Navajo, Pickup

MAZDA 4WD: 1991-97 Navajo, Pickup

About this part

The 23184 is a 2WD/4WD camber and caster sleeve with 1 degree adjustment, widely used on many Ford and Mazda 2WD and 4WD trucks. It adjusts 1.00 degree total change on 2WD and .75 degree on 4WD, and it takes about 0.5 hour per side with one sleeve required per wheel. Ford 2WD applications include 1987 and up F350 and 1989-97 Ranger. Ford 4WD covers 1991-94 Explorer and 1990-97 Ranger. Mazda Navajo and Pickup are 1991-97.

Also called: caster sleeve sets, cambers, casters

Also listed as: 231-23184, I-23184

Borg item #:

SP23184

Cross-References:

Ascot No. 231-23184

California Prop 65 Warning:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov