753S-8 HALTEC Hand-Bendable Extension

Equipped with 2 lock nuts and 3/4in. hex sealing nut. A teflon gasket seals on end of valve, the lead seal in the sealing nut is forced into the threads for a second seal, positively locking extension to valve. Cap and core not included. They should be removed from valve and transferred to extension. Should be anchored to rim.

Effective Length:

- 8in.

- 203.2mm

About this part

The 753S-8 is a HALTEC hand-bendable large bore extension with an effective length of 8 inches (203.2 mm). It comes with 2 lock nuts and a 3/4 inch hex sealing nut, a teflon gasket seals on the end of the valve, and the lead seal in the sealing nut is forced into the threads for a second seal that locks the extension to the valve. Cap and core are not included, so transfer them from the valve, and anchor the extension to the rim. Shops also call it a hand bendable large bore extension.

Also called: dually extension, large bore valves, hand bendable extensions

Also listed as: 753S-8, 465-75080

Borg item #:

HA753S8

Cross-References:

Ascot No. 465-75080

California Prop 65 Warning:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov