810F-25 HALTEC Flexible Extension

Made with tough rubber hose and reusable hydraulic-type fittings. Equipped with 2 lock nuts and 3/4in. hex sealing nut. A teflon gasket seals on end of valve. The lead seal in the sealing nut is forced into the threads for a second seal, positively locking extension to valve. Cap and core are not included. They should be removed from valve and transferred to extension. Other lengths can be ordered.

Effective Length - 25in. - 635mm

ASCOT # 465-81250

About this part

The 810F-25 is a HALTEC flexible large bore extension with an effective length of 25 inches (635 mm), made with tough rubber hose and reusable hydraulic-type fittings. It comes with 2 lock nuts and a 3/4 inch hex sealing nut, a teflon gasket seals on the end of the valve, and the lead seal in the sealing nut is forced into the threads for a second seal. Cap and core are not included, so move them from the valve to the extension. Other lengths can be ordered.

Also called: dually extension, large bore valves

Also listed as: 810F-25, 465-81250

Borg item #:

HA810F25

California Prop 65 Warning:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov