810F-8 HALTEC Flexible Extension

Effective Length 8in. - 203.2mm

Made with tough rubber hose and reusable hydraulic-type fittings. Equipped with 2 lock nuts and 3/4in. hex sealing nut. A teflon gasket seals on end of valve. The lead seal in the sealing nut is forced into the threads for a second seal, positively locking extension to valve. Cap and core are not included. They should be removed from valve and transferred to extension. Other lengths can be ordered.

ASCOT # 465-81080

About this part

The HALTEC 810F-8 is an 8 in. (203.2 mm) flexible large bore valve extension made with tough rubber hose and reusable hydraulic-type fittings. It has two lock nuts and a 3/4 in. hex sealing nut, a teflon gasket seals on the end of the valve, and the lead seal in the nut is forced into the threads for a second seal. The cap and core are not included, so move them from the valve to the extension. Other lengths can be ordered.

Also called: hal-tec, haltec inflator, flexible large bore extension, large bore valves

Also listed as: 810F-8, 465-81080

Borg item #:

HA810F8

California Prop 65 Warning:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov