LR-20 Earthmover L-Ring Seal 20"

The primary purpose of the L-ring seal is to create an air seal where the tire bead and rim bead seat are not completely compatible. Some of the examples where the L-seal will prove useful: Where you have an irregular butt weld in the knurled bead seat area; Where, during initial inflation, the bead seating is very difficult; When an air passage between the bead and the rim is identified; Where overloads and severe operating conditions cause the rim deformation (deflection) which can result in air leakage.

IMPORTANT INFORMATION: L-Ring Seals are not a cure for damaged beads nor damaged wheels and rims. Caution should be used during all installations. Do not install where broken bead is suspected; Always follow the respective manufacturers‘ recommendation for proper bead-lubrication and initial air pressure to properly seat beads; If you have any questions regarding the use of the L-Ring Seals, contact Haltec prior to attempting any installation.

C/L 60.00 + 50 L-Ring 20

About this part

The LR-20 is a Haltec earthmover L-ring seal for 20 in. rims. It creates an air seal where the tire bead and rim bead seat are not completely compatible, such as an irregular butt weld in the knurled bead seat area, a bead that is hard to seat on first inflation, or air passing between the bead and the rim. L-ring seals do not cure damaged beads, wheels or rims, so do not install one where a broken bead is suspected. Follow the manufacturers' bead lubrication and initial air pressure guidance, and call Haltec with installation questions.

Also called: haltec lr20, haltec corporation, l-rings

Also listed as: LR-20, 471-80120

Borg item #:

ORLR20

California Prop 65 Warning:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov