LR-39 L-Ring Seal 39"

The primary purpose of the L-Ring Seal is to create an air seal where the tire bead and rim bead seat are not completely compatible. Some of the examples where the L-seal will prove useful:

- Where you have an irregular butt weld in the knurled bead seat area.

- Where, during initial inflation, the bead seating is very difficult.

- When an air passage between the bead and the rim is identified.

- Where overloads and severe operating conditions cause the rim deformation (deflection) which can result in air leakage.

Important Information

- L-Ring seals are not a cure for damaged nor damaged wheels and rims. Caution should be used on all compatibility. Do not install where broken bead is suspected.

- Always follow respected manufacturers' recommendation for proper bead lubrication and initial air pressure to properly seat beads.

- If you have any questions regarding the use of L-Ring Seals, contact Haltec prior to attempting any installation.

ASCOT # 471-80139

About this part

The LR-39 is a Haltec 39 inch L-ring seal for earthmover rims. It creates an air seal where the tire bead and rim bead seat do not fully match, such as an irregular butt weld in the bead seat, hard initial bead seating, or an air passage between bead and rim. It is not a cure for damaged wheels and should not be installed where a broken bead is suspected.

Also called: l-ring seal for earthmover rims 39in, air passage between bead and wheel, l rings for earthmovers, valve hardware, haltec corporation

Also listed as: LR-39, LR39, 471-80139

Borg item #:

HALR39

California Prop 65 Warning:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov